Analysis on the core design principle of TXP ceramic cyclone dust collector
The main structure of TXP ceramic cyclone dust collector is mainly composed of upper box body, middle box body, lower box body (ash bucket), ash cleaning system and ash discharge mechanism. The performance of TXP ceramic cyclone dust collector is good or bad. In addition to the reasonable selection of filter bag materials, the ash removal system plays a decisive role in the TXP ceramic cyclone dust collector. The ash removal method is one of the characteristics of the TXP ceramic cyclone dust collector and is operated by the TXP ceramic cyclone dust collector. An important part, widely used in metallurgy, chemical, ceramics, cement, food and other industries. Among various dust collectors, it is a competitive dust collector.
The technical key of TXP type ceramic cyclone product
①The flue gas has a wide range of temperature fluctuations, high moisture content and dew point temperature. The flue gas contains SO2 and HF, and is highly corrosive. The dust collector must meet the requirements of the production process to solve the high temperature "bag burning" and low temperature "Push the bag" problem.
②On the premise that the dust emission concentration reaches the standard, the TXP ceramic cyclone dust collector is required to have low investment, high space utilization, small footprint, short installation period, reduce equipment volume, and reduce steel consumption.
③By switching the main exhaust air flow and the reverse soot blowing air flow, the cleaning process is completed. For the effect of ash and slag, it is necessary to solve the air leakage and control problems of the switch valve. The operation of TXP ceramic cyclone dust collector can be divided into trial run and daily operation. During the test run, a single component in the system was checked, then adaptive operation was performed, and several performance tests were performed. In daily operation, inspections are still needed, especially the performance of TXP ceramic cyclone dust collectors. It should be noted that changes in the load of the main equipment have an impact on the performance of the vacuum cleaner.
④ TXP ceramic cyclone dust collector requires performance, stable operation and low energy consumption, which can solve the problem of serious wear of the filter bag and unsatisfactory cleaning effect. There are "secondary dust", "dust reattachment", ash bucket arching, and poor airflow distribution. The issue of equality.
If you are interested, we can discuss ceramic bag filter and ceramic filter bags.